Welcom e
2
Welcome to SmartView & SmartScope
We hope you share our dream for the television industry to become a truly creative industry by allowing
anyone to have access to the highest quality video.
Video monitoring is needed everywhere in a facility. SmartView Duo provides two completely independent
and beautiful 8 inch LCDs in a 3RU rack housing less than an inch thick. SmartScope Duo features two
independent 8" LCDs with waveform scope functionality, allowing you to monitor your video levels on the
fly. SmartView HD provides an amazing 17" LCD in a 6RU rack housing less than an inch thick. All SmartView
monitors support SD, HD and even 2K video via 3G-SDI!
Video monitoring is designed to work straight out of the box and our free utility software provides the user
with an easy and intuitive configuration tool.
This instruction manual should contain all the information you’ll need on installing your SmartView or
SmartScope, although it’s always a good idea to ask a technical assistant for help if you are not sure what IP
addresses are, or if you don’t know much about computer networks. SmartView and SmartScope are easy
to install, however, there are a few slightly technical preferences you may need to set after you install it.
We think it should take you approximately 5 minutes to complete installation. Please check our website at
www.blackmagicdesign.com and click the support page to download the latest updates to this manual and
SmartView software. Lastly, please register your unit when downloading software updates so we can keep
you updated when new software is released. We are constantly working on new features and improvements,
so we would love to hear from you!
Grant Petty
CEO Blackmagic Design
SmartView HD
SmartView Duo
SmartScope Duo
To Next Page
Loading...
Need help?
General
