Adjusting Monitor Settings
11
Copy/Paste Display Settings
If you have already set up one SmartView unit with monitor settings that you would like to apply to others,
you can copy and paste those settings to other units. You can copy SmartScope settings to a SmartView
unit, but only settings applicable to SmartView will be copied. To copy and paste display settings:
Step 1. Click on the unit from which you want to copy settings in the SmartView Monitors pane.
Step 2. Go to the
Device menu, or click the action button (gear icon) and choose Copy Display
Settings (Ctrl-C, Cmd-C)
Step 3. Now click on the unit whose monitor settings you wish to change in the SmartView Monitors
pane.
Step 4. Go to the
Device menu, or click the action button (gear icon) and choose Paste Display
Settings (Ctrl-V, Cmd-V)
Copying and pasting display settings can also be done when connected with Ethernet.
Copy and Paste Display Settings
To Next Page
Loading...
Need help?
General
