4 Using the ‘audio’ buttons, select the embedded, AES, or analog audio input.
5 After setting your input, you can now change your output settings for your
desiredconversion.
Press the IN button to display the video input format. In this example,
the format is 1080i50 via SDI with embedded audio.
Setting your output
1 Press the ‘out’ button on the left side of the control panel.
2 Select the video ‘format’ you want to convert to.
3 Choose the ‘frame’ line mode you want. For example, progressive, interlaced or
progressive segmented frame.
4 Choose the desired frame ‘rate’.
5 Now set the ‘aspect’ ratio you want.
Your converted video will now appear on the LCD and is available on all relevant video outputs.
Setting the Latency for Teranex AV
Teranex AV has a processing mode which by default is set to ‘lowest latency.’ This mode is ideal
for use in live productions, with a typical latency or processing delay through the Teranex AV of
2 frames. To achieve this low latency, Teranex features not required in live productions are
bypassed without affecting the overall image quality of your program. For post production
applications we recommend that you use the ‘highest quality’ setting, which will enable you to
utilize scene cut detection, noise reduction and linear interpolation algorithms as needed. To
set the latency for Teranex AV:
1 Press the ‘home’ button, then press ‘system setup’ and then ‘processing’ to reach the
‘processing’ menu.
2 Select ‘lowest latency’ for live productions or ‘highest quality’ for post production
applications.
3 Your Teranex AV will restart to enable the chosen processing mode.
That’s all there is to getting started with your Teranex processor. With the setup utility installed
and your Teranex updated with the latest internal software, you can start setting your conversion
workflows. Please keep reading the instruction manual for more detailed information on all the
different conversion types, settings and powerful features of your Teranex processor.
IN
OUT
SDI
HDMI
ANLG
EMBED
AES
ANLG
486
720
2K
1080
576
1080
P
I
PSF
HOME
MENU
1
MENU
2
REM
LOCK
PANEL
LOCK
23.98
25
29.97
30
24
50
59.94
60
GAIN
SAT
R-Y
B-Y
BLK
HUE
SHARP
SYSTEM STATUS
1
3
5
2
4
6
ANAM
LBOX
PBOX
SMART
14:9
CCUT
ZOOM
ADJ
VIDEO AUDIO FORMAT FRAME MENURATE VIDEO PRESETS AUDIO STATUSASPECT
IN
OUT
SDI
HDMI
ANLG
EMBED
AES
ANLG
486
720
2K
1080
576
1080
P
I
PSF
HOME
MENU
1
MENU
2
REM
LOCK
PANEL
LOCK
23.98
25
29.97
30
24
50
59.94
60
GAIN
SAT
R-Y
B-Y
BLK
HUE
SHARP
SYSTEM STATUS
1
3
5
2
4
6
ANAM
LBOX
PBOX
SMART
14:9
CCUT
ZOOM
ADJ
VIDEO AUDIO FORMAT FRAME MENURATE VIDEO PRESETS AUDIO STATUSASPECT
NOTE For more information, refer to the “Conversion Workflows” section in
this manual.
66Getting Started
To Next Page
Loading...
Need help?
General
