Blaupunkt Brisbane SD48 - Switching on;off; Switching on;off using button (4); Switching on;off via vehicle ignition; Switching off with detachable control panel

Switching on/off
Switching on/off
There are various ways of switching the de-
vice on/off:
Switching on/off using button 0
.... To switch on the device, press button
0·
.... To switch off the device, press and
hold down button 0 for longer than
two seconds.
The device switches off.
Note:
To protect the vehicle battery, the de-
vice will switch off automatically after
one hour if the ignition is off.
Switching on/off via vehicle
ignition
The device will switch on/off simultaneous-
ly with the ignition if the device is correctly
connected to the vehicle's ignition and you
did not switch the device off and back on by
pressing button 0.
Switching off with detachable
control panel
.... Detach the control panel.
The device switches off.
Timeout function
Timeout function
The device features a time-out function
(time window). For example, if you press
the MENU button @ and select a menu
item, the device switches back after ap-
prox. 8 seconds after the last button activa-
tion. The settings performed are saved .
I 11