Blaupunkt Brisbane SD48 - Clock - Time; Displaying the time; Setting the time; Selecting 12;24-hour clock mode

Clock - Time
Displaying the time
You can display the time in the tuner, SO,
USB and CD changer mode.
.... Press the button DIS ® repeatedly un-
til the time appears.
Setting the time
To set the time,
.... press the MENU button @.
The display shows "MENU".
.... Press the ~ or I\. button 0 repeatedly
until"CLOCK SET' appears on the dis-
play.
.... Press the> button 0to open the sub-
menu.
The currently set time appears on the dis-
play. The hours flash and can be adjusted.
.... Adjust the hours with the I\. or v but-
ton 0.
Once the hours are set,
.... press the> button 0.
The minutes flash.
.... Adjustthe minutes with the I\. or~ but-
ton 0.
When you have finished making your
changes,
.... press the MENU button @.
To exit the menu,
.... press the ESC button @.
Clock - Time
Selecting 12/24-hour clock
mode
.... Press the MENU button@.
The display shows "MENU".
.... Press the v or I\. button 0 repeated-
ly until "24 H MODE" or "12 H MODE"
appears on the display.
.... Press the> button 0 to call up the
submenu.
.... Press the > button 0 to switch be-
tween the modes .
When you have finished making your
changes,
.... press the MENU button@.
To exit the menu,
.... press the ESC button @.
Displaying the time with device
and ignition switched off
To display the time when the device is off
and the vehicle ignition is on,
.... press the MENU button@.
The display shows "MENU".
.... Press the ~ or I\. button 0 repeated-
ly until "CLOCK OFF" or "CLOCK ON"
appears on the display.
.... Press the> button 0 to call up the
submenu.
.... Press the > button 0 to switch the
display between ON and OFF.
When you have finished making your
changes,
.... press the MENU button @.
To exit the menu,
.... press the ESC button @.
I 23