Blaupunkt Brisbane SD48 - Configuring the display; Selecting a directory; Selecting tracks; Fast searching (audible)

As soon as a USB data carrier is connected
,
it can be selected with the SRC button 0.
The display shows "USB".
Configuring the display
You can display various types of informa-
tion on the current track:
• File name or track name
• Artist
•
Album name
• Play time (PLAY)
• Time (ClK)
Note:
File names and 103 text with more than
9 characters are displayed as scrolling
text.
To switch between the different display op-
tions,
... press the DIS button @.
Notes:
• Artist and album name are a compo-
nent of the MP3103 tags of version 1
and can only be displayed if they were
stored with the MP3 files. For further
details, please read the instructions
for your PC-MP3 software.
• Artist and album name are each
displayed for approx. 10 seconds.
Afterwards, the file name is displayed
again.
• If artist and album name are not avail-
able, the file name is displayed
MP3/WMA mode
Selecting a directory
To move up or down to another directory,
... press the v or /\ ® button once or
several times.
Selecting tracks
To move up or down to another track in the
current directory,
... press the < or > ® button once or
several times.
Fast searching (audible)
To fast search backwards or forwards ,
... press and hold down the < or> button
® for longer than two seconds.
Seek tuning continues as long as you hold
the button pressed.
Repeating individual tracks or
whole directories (REPEAT)
You can repeatedly play the current track or
all tracks in the current directory.
... Press the button 4 RPT 0 repeatedly
until the desired function appears on
the display:
• "RPT TRACK" (current track)
• "RPT OIR"
(all tracks in the current directory)
•
"RPT OFF" (end repeat)
As long as the repeat function is active, the
display shows the RPT symbol.
I 19