Blaupunkt Brisbane SD48 - Adjusting E-XBASS

When you have finished making your
changes,
.... press the MENU button @.
To exit the menu,
.... press the ESC button @.
Adjusting E-XBASS
In the "E-XBASS" submenu, you can also ad-
just the cut-off frequency in addition to the
X-BASS boost. You can select whether the
increase should affect the entire X-BASS
frequency range (setting "FLAT") or pur-
posefully only one of three X-BASS frequen-
cies (400 Hz, 800 Hz, 2400 Hz).
.... Press the MENU button @.
The display shows "MENU".
.... Press the ~ or 1\ button 0 repeatedly
until "AUDIO" appears on the display.
.... Press the> button CD to call up the
audio menu.
"BASS" appears on the display.
.... Press the v or 1\ button 0 repeatedly
until "ENHANCED" appears on the dis-
play.
.... Press the> button 0 to call up the
submenu.
"E-BASS" appears on the display.
.... Press the ~ or 7\ button 0 repeat-
edly until "E-XBASS" appears on the
display.
.... Press the> button 0 to call up the
submenu.
"GAIN" and the currently set value are dis-
played.
X-Bass
.... Press the v or 1\ button 0 to select
between "GAIN" (X-BASS boost) and
"FREQ" (frequency) .
....
Press the < or > button 0 to change
the selected setti ng.
When you have finished making your
changes,
.... press the MENU button @.
To exit the menu,
.... press the ESC button @.
I 29