Blaupunkt Brisbane SD48 - CD-changer mode; Switching to CD-changer mode; Selecting CDs; Selecting tracks

CD-changer mode
Notes:
• Information about handling CDs, in-
serting CDs and operating the CD
changer can be found in the operat-
ing instructions supplied with your
CD changer.
• Before connecting a CD changer,
check whether the IICDC ON
II
setting
has been select in the menu. For fur-
ther details, please read the section
IIAdjusting the rear AUX-IN input
ll
in
the chapter IIExternal audio sources
ll
•
Switching to CD-changer mode
..- Press the SRC button ® repeatedly
until the display shows IICDC/AUX-IN
II
.
If a CD changer is connected, the display
shows IICHANGER". The device starts play-
ing the first CD that the CD changer de-
tects.
Selecting CDs
To move up or down to another CD,
..- press the v or A CD button once or
several times.
Note:
The device will ignore empty CD slots in
the changer and slots containing invalid
CDs.
CD-changer mode
Selecting tracks
To move up or down to another track on the
current CD,
..- press the < or > CD button once or
several times.
Fast searching (audible)
To fast search backwards or forwards,
..- press and hold down the < or> button
CD for longer than two seconds.
Seek tuning continues as long as you hold
the button pressed.
Configuring the display
Three options are available forthe display in
CD changer mode:
• Track number and playing time
• Track number and time
• CD number and track number
To switch between the different display op-
tions,
..- press the DIS button @.
Repeating individual tracks or
whole CDs (REPEAT)
You can repeatedly play the current track or
all tracks on the current CD.
..- Press the button 4 RPT ® repeatedly
until the desired function appears on
the display:
• IIRPT TRACK
II
(current track)
• IIRPT DISCII
(all tracks on the current CD)
• IIRPT OFF" (end repeat)
I 21