11
Adjusting the volume
To change the volume of the cur-
rently playing source:
Turn the volume control 2.
The volume changes. The current
volume is shown on the volume
display and stored.
Note:
The device handles the volume
of the different sources (music,
voice output or phone) independ-
ent of each other. You only con-
trol the volume of the currently
active audio source at any given
time. The volume of the other au-
dio sources does not change.
Muting the device
You can mute the currently playing
audio source as follows:
Briefly press the On/Off but-
ton 3.
MUTE briefl y appears on the dis-
play.
Note:
In each case, you only mute the
currently playing audio source
(music, traffi c announcement,
voice-prompted turn-by-turn di-
rection or phone). As soon as you
activate a different audio source,
it is played back with the previ-
ously selected volume.
➜
➜
Diving recommendation an-
nouncements of the navigation
system can also be switched off
(see p. 24).
To cancel the mute function:
Briefl y press the On/Off button
3 again or turn the volume con-
trol 2.
Operation with car phone
If the device is connected to a car
phone:
If the device is switched off, it au-
tomatically switches on when you
receive a call or make a call,
the phone symbol appears during
the phone call or the "PHONE"
text appears on the display dur-
ing the destination guidance,
the audio source which is cur-
rently playing is muted as long as
you are making a phone call,
the voice of the person calling
you is played back via the loud-
speakers of the vehicle,
the access to many menus (see p.
12) is blocked during the phone
call.
➜
•
•
•
•
•
FMT
16:13
NDR 2
Tune Band
TMC
1
2
3
4
5
6
92,8
Optionen
Volume 4
FMT
16:13
NDR 2
Tune Band
TMC
1
2
3
4
5
6
92,8
Optionen
Volume 4
The basic functions
ROME56E_eng.indd 11ROME56E_eng.indd 11 23.08.2006 15:04:53 Uhr23.08.2006 15:04:53 Uhr
To Next Page
Loading...
