Blaupunkt TravelPilot Rome Europe NAV56E - Storing Stations

38
You can now do the following:
Store this station, see below,
search for additional stations by
waiting for 10 seconds,
cancel the scan (see below).
After 10 seconds, the next station
is automatically searched for and
played.
Cancelling the SCAN and
continuing to listen to a station
After the entire frequency band has
been searched once and all stations
have been scanned and played,
the SCAN automatically stops and
the previously scanned station is
played.
If you want to cancel the scan
early:
Press the ESC button A.
Or:
In the Options menu of the ra-
dio, select and confi rm the "Stop
scan" menu item.
The scan process is stopped.
The previously scanned station
is played.
You can now store this station (see
below) or restart the automatic sta-
tion seek tuning (see p. 36).
•
•
•
➜
➜
Storing stations
You can store 6 stations in each
memory bank – either manually
(memory banks FM1, FM2, MW and
LW) or automatically (memory bank
FMT).
Storing stations manually
Select the memory bank FM1 or
FM2 fi rst or one of the MW or LW
wavebands (see p. 35).
Note:
Do not use the FMT memory bank
because the stations in this mem-
ory bank are deleted whenever
stations are stored automatically
(see p. 39).
Tune into the desired station
(see p. 36).
Press one of the function but-
tons 1 5 to 6 : for longer than
2 seconds.
The frequency or the station
name B appears next to the
function button A. The station
is assigned to the button you
press.
Note:
If the station name is too long, it
is abbreviated on the display.
➜
➜
➜
1 BBC 4Virgin Radio
2 BFBS 596.2
3 Capital FM 689.7
B
A
1 BBC 4Virgin Radio
2 BFBS 596.2
3 Capital FM 689.7
B
A
Operating the radio
ROME56E_eng.indd 38ROME56E_eng.indd 38 23.08.2006 15:05:05 Uhr23.08.2006 15:05:05 Uhr