63
Route calculation
When you start the destination
guidance, you hear: "Calculating
route" and the display shows the
overview of the route options for
approx. 10 seconds.
To change the route options now:
Mark and confi rm the "Change"
menu within 10 seconds.
The "Route options" menu ap-
pears (see p. 68).
If you do not want to change the
route options at this time:
Wait approx. 10 seconds or se-
lect and confi rm the "Continue"
menu.
After the route calculation, the
route as well as a corridor to
the left and the right side of the
route is saved in the memory of
the navigation system. The com-
pletion of the corridor data is il-
lustrated by the corridor status
display K, provided that the navi-
gation CD is in the drive.
➜
➜
If desired, you can remove the
navigation CD from the device as
soon as at least 2/3 of the cor-
ridor status display K is fi lled,
and play a CD.
Note:
If you leave the corridor while
driving, you hear a request to re-
insert the navigation CD. If you
do not insert the navigation CD,
you hear a corresponding note
and no additional turn-by-turn
directions follow.
If the vehicle is located on a street
that is recognised by the software
("digitised street"), the destination
guidance starts via voice-prompted
and visual turn-by-turn directions.
DANGER!
Turn-by-turn directions can
deviate from the actual
traffi c routing!
Turn-by-turn directions that do no
correspond to the Highway Code
can lead to accidents.
Follow the turn-by-turn direc-
tions only if you do not violate
any traffi c regulations!
➜
Calculating route
Short
Dynamic
Change Continue
Calculating route
Short
Dynamic
Change Continue
FM1
01:13
TMC
1
2
3
4
5
6
7
A2 / E30
Hildesheim
FM1
01:13
TMC
1
2
3
4
5
6
7
A2 / E30
Hildesheim
Operating the navigation system
ROME56E_eng.indd 63ROME56E_eng.indd 63 23.08.2006 15:05:15 Uhr23.08.2006 15:05:15 Uhr
To Next Page
Loading...
