47
CAUTION!
Defective navigation CDs
are not operational!
If you insert a navigation CD without
"E" imprinted on it or a self-burnt
navigation CD, the navigation sys-
tem does not work! The display per-
manently shows the text "Navigation
is being activated".
Use only the original navigation
CDs for the ROME NAV56E with
the "E" imprint!
Ensure that the CD is not dam-
aged.
To load the navigation software:
Insert the original navigation CD
with the "E" imprint in the drive
(see p. 10).
The display shows "NAVI SW" and
a progress indicator. "Language is
being loaded" appears next. The
navigation software is automati-
cally installed.
Do not interrupt the installation
of the navigation software!
As soon as the installation is
complete, the displays shows
"Observe the road traffi c regula-
tions".
The navigation software remains
in the memory of the device until
the device is disconnected from
the power supply. The navigation
software must be reinstalled if the
device:
Is not switched on for 72 hours
since the device automatically
shuts down after this time to
spare the vehicle's battery,
➜
➜
➜
➜
•
is disconnected from the operat-
ing voltage.
Note:
Similar to a printed street map,
the map material is no longer up
to date after some time. This may
result in incorrect turn-by-turn
directions. For this reason, re-
place your navigation CD as soon
as a new version is available (see
www.blaupunkt.com).
The navigation display
To display the navigation display:
Press the NAVI button >.
The navigation display appears.
Note:
The navigation software must be
loaded for the navigation display
to be displayed.
Functions assigned to the func-
tion buttons (5 to :)
TMC symbol
TA symbol
•
➜
A
B
C
HILDESHEIM
FM1
01:13
Destn. Memory Options
TMC
1
2
3
4
5
6
7
A
F
G
H J K
N
B
C D
E
A
L
M
HILDESHEIM
FM1
01:13
Destn. Memory Options
TMC
1
2
3
4
5
6
7
A
F
G
H J K
N
B
C D
E
A
L
M
Operating the navigation system
ROME56E_eng.indd 47ROME56E_eng.indd 47 23.08.2006 15:05:08 Uhr23.08.2006 15:05:08 Uhr
To Next Page
Loading...
