13
The "Tuner" menu can be select-
ed only if the radio is currently
set to an FM station.
The "Tuner" menu is displayed.
The fi rst menu item, "RDS", is
highlighted.
Selecting a menu item
Turn the menu button < until
the "Sensitivity" menu item is
highlighted.
Changing and saving the setting
of the menu item
Press the OK button =.
The check mark behind "Sensitivity"
disappears. This reduces the re-
ception sensitivity of the radio so
that the station seek tuning fi nds
only strong stations and ignores
weak, noise-degraded stations.
➜
➜
Exiting the settings menu
Press the ESC button A repeat-
edly until the settings menu is
displayed.
If you briefl y press the ESC but-
ton A, you return to one higher
menu level. If you press on the
ESC button A for a longer time,
you are immediately returned
to the top level of the settings
menu.
Note:
The top left corner of the display
shows three boxes which display
the menu level on which the cor-
responding menu is located.
Overview of the settings menu
The following overview represents
the settings menu which is called
via the MENU button 4.
➜
Tuner
RDS VAR
Alternat. freq.
Regional
Sensitivity
HighCut 0
Tuner
RDS VAR
Alternat. freq.
Regional
Sensitivity
HighCut 0
Tuner
RDS VAR
Alternat. freq.
Regional
Sensitivity
HighCut 0
Tuner
RDS VAR
Alternat. freq.
Regional
Sensitivity
HighCut 0
Tuner
RDS VAR
Alternat. freq.
Regional
Sensitivity
HighCut 0
Tuner
RDS VAR
Alternat. freq.
Regional
Sensitivity
HighCut 0
First menu level
All subsequent menu
levels
Last menu level
Operating the settings menu
ROME56E_eng.indd 13ROME56E_eng.indd 13 23.08.2006 15:04:54 Uhr23.08.2006 15:04:54 Uhr
To Next Page
Loading...
