33
system can incorporate traffi c ob-
structions and calculate an alter-
nate route.
To switch automatic tuning to TMC
stations on/off:
Press the TRAF button ?.
the traffi c information menu ap-
pears.
In the traffi c information menu,
select and confirm the "TMC
auto" menu item.
You can activate the traffi c infor-
mation (check mark) or deacti-
vate it (no check mark) with the
OK button =.
The display shows the TMC sym-
bol A, provided that the current
radio station broadcasts TMC
data.
If the TMC symbol does not fl ash,
the device receives a radio sta-
tion that broadcasts TMC data. As
soon as you start a dynamic des-
tination guidance, these data are
processed.
If a list symbol is displayed next to
the TMC symbol, TMC messages
have already been received and
stored. To display these messages,
see below. These messages are au-
tomatically incorporated during the
➜
➜
dynamic destination guidance (see
p. 70).
If the TMC symbol fl ashes, the de-
vice does not receive any TMC data
(e.g. because you left the frequency
range with your vehicle). Dynamic
destination guidance is not pos-
sible! The device automatically
searches for a radio station which
broadcasts TMC data. This search
may take some time since the entire
frequency band is being searched.
Radio reception is not possible dur-
ing this search.
Showing TMC traffi c
announcements
Particularly urgent TMC messages
(alarm messages) are automatical-
ly shown on the display. To scroll
through this TMC message:
Turn the menu button <.
To hide this TMC message:
Press either the ESC button A
or the OK button =.
All received TMC messages are au-
tomatically stored in the list of the
TMC messages.
To display this list:
Press the TRAF button ; for
2 seconds.
Or:
Press the TRAF button ;.
the traffi c information menu ap-
pears.
➜
➜
➜
➜
Traffic
TA
TMC auto
TMC messages
Traffic
TA
TMC auto
TMC messages
FMT
14
TMC
A
FMT
14
TMC
A
While driving
ROME56E_eng.indd 33ROME56E_eng.indd 33 23.08.2006 15:05:02 Uhr23.08.2006 15:05:02 Uhr
To Next Page
Loading...
