To Next Page

To Previous Page

Troubleshooting

Error Code 34

The water pressure is too low.

Steps

Check list

Solution

Check that the water is turned on.

Clean the solenoid valve

filter.

Check that the water pressure is at least

Change the sensor.

36 psi.

Error Code 37

While running the CombiWash program, the oven could not cool down to set point.

Steps

Check list

Solution

Check that the jet in the oven chamber is

Run CombiWash step 0

not clogged and working.

before using the oven.

Error Code 38

CombiWash was interrupted while there was still detergent in the oven chamber.

Steps

Check list

Solution

Run CombiWash step 0

before using the oven.

Error Code 39

There is insufficient memory to run the selected operation.

Steps

Check list

Solution

If possible, delete some

HACCP files.

SERVICE MANUAL 47

Blodgett BLCT User Manual

Other manuals for Blodgett BLCT