Bluetti ACB300 - 7.2.4. Machine Type (for split phase setting, exclusive for 100-120 V Version); 7.2.5. Working Mode; 7.2.6. Max. Grid Input Current

15
7.2.4. Machine Type (for split phase setting, exclusive for 100-120V Version)
*1 NEMA L14-30 receptacle, 30A
*2 NEMA TT-30 receptacle, 30A
*4 Standard AC receptacle, 20A
(Split Phase for *2 AC300 + B300)
7.2.5. Working Mode
Tip: The AC300+B300 defaults to Standard UPS Mode.
There are 4 working modes you can select in settings:
Standard UPS Mode: Default working mode.
Time Control UPS Mode: Suitable for areas with peak and o-peak time-of
use rates in order to save money.
PV Priority UPS Mode: Recommended for areas in stable power supply.
Customized UPS Mode: Customized the parameters for a better user
experience. For more details on each UPS Mode setting, please read Chapter
10. UPS.
7.2.6. Max. Grid Input Current
● Please check the specication of your grid, sockets, connections, wires, etc.
to determine the maximum allowable current that can be drawn by the AC300.
BLUETTI is not liable for any damages, injuries, or any other legal responsibility
incurred directly or indirectly from changes made to this setting.
● Max. Grid Input Current: limit the Max. input current of the tied grid, when
the current exceeds the preset value, AC300 will take charge to be the power
source of the circuit.