23
8.2.3. Charging Method 5 :Charging via Lead-acid battery
● Connect to the positive and negative poles of the battery through the
provided solar charging cable(pay attention to distinguish the positive and
negative poles of the battery, the red clamp indicates the positive pole, and the
black one indicates the negative pole) .
● Tap “setting” at homepage to set DC1/2 input source to “Others” to charge
from lead-acid battery.
8.3. Dual Charging
Wall Outlet
Aviation Port 1(CP1)
Aviation Port 1(CP2)
EV Charging
Station
Wind Turbine
Generator
Solar panels
T500 adapter
Car
Lead-acid Battery
By using BLUETTI Wind Turbines, an ultra-
connect, highly efficient wind charger lets
you harness the wind to rapidly recharge
the AC300+B300.
Now, you can also get dash charging via the
EV charging stations all over the US soil.
Charging Method 6: Supports charging the AC300+B300 with CP1 and CP2 at
same time. You can use any charging methods listed previously, simultaneous,
to maximize charging power input. They are listed here again for your
convenience. Select one method for CP1 and one method for CP2 for
simultaneous charging.
To Next Page
Loading...
