Bluetti ACB300 - 15. FAQ (Frequently Asked Questions)

43
097
BMS Temperature
abnormal
Please store AC300 at the recommended
temperature and leave it until the temperature
inside back to the normal standard.
098 BMS Over Voltage
Please contact with the dealer if the error still
exists after rebooting the unit.
099 BMS Low Voltage
Please contact with the dealer if the error still
exists after rebooting the unit.
100 BMS Over Current
Please contact with the dealer if the error still
exists after rebooting the unit.
101 BMS Precharge Error
Please contact with the dealer if the error still
exists after rebooting the unit.
102 BMS Output Short Circuit
Please contact with the dealer if the error still
exists after rebooting the unit.
103
BMS communication cable
error
Please check whether the battery power cable
is reliably connected.
Please check whether the lock switch on the
power cable has been turnd on.
Please contact with the dealer if the error still
exists after rebooting the unit.
107 NTC Faulty
Please leave the unit at the recommended
temperature few hours to recover.
Please contact with the dealer if the error still
exists after rebooting the unit.
108 Fan Faulty
Clean or replace the fan to ensure proper
ventilation.
Please contact with the dealer if the error still
exists after rebooting the unit.
15. FAQ (Frequently Asked Questions)
● How to claim the warranty and extended warranty?
Please refer to the warranty card you received from where you have ordered
the product from. Any extended warranty, if purchased, will only take effect
after the default warranty has expired.
● Can the unit rmware be upgraded?