38
BLUETTI
13. STORAGE AND MAINTENANCE
14. TROUBLESHOOTING
Error
Code
Error List Troubleshooting
001 D-AMCU Warning
Please contact with the dealer if the error still
exists after rebooting the unit.
002 D-BMS Warning
Please contact with the dealer if the error still
exists after rebooting the unit.
003 D-A Communication Error
Please contact with the dealer if the error still
exists after rebooting the unit.
004
Battery Voltage High
-Hardware
Please contact with the dealer if the error still
exists after rebooting the unit.
005
BUS Voltage High-
Hardware
Please contact with the dealer if the error still
exists after rebooting the unit.
006
SPS Voltage Low-
Hardware
Please contact with the dealer if the error still
exists after rebooting the unit.
007 Fan Warning-Hardware
Clean or replace the fan to ensure proper
ventilation.
Please contact with the dealer if the error still
exists after rebooting the unit.
● Please turn o the unit and charge it to 50-70% capacity every time before
storing it.
● To preserve the battery health, please discharge and fully charge the unit at
least once every 6 months.
● Ensure proper ventilation in use or store and keep away from any
combustible materials or gases.
● Avoid exposing the unit to rain or wet environment, and direct sunlight (32-
113 ℉ , 0-45℃ ), clean and dry environment is strongly recommended.
● Dry, non-abrasive cloths to wipe will be perfect. The power station is a
versatile tool for various adventures, simple cleaning would be required from
time to time to keep the unit in a good condition.
● Keep the unit away from children and pets.
To Next Page
Loading...
