JUST POWER ON 07
1.1.2 General Safety
•
Do not install, use and maintain the unit in adverse weather conditions such as
lightning, rain, snow, and strong breezes (including but not limited to handling
and operating the unit, plugging and unplugging signal connections to outdoor
facilities, working at height, outdoor installations, etc.).
• Always turn off the power source before starting any electrical work.
• Do not clean the equipment with water.
• Do not disassemble, modify, tamper with, or repair the equipment on your own.
• Regularly inspect the unit and its accessories for damage.
• Use a tester to check for the presence of dangerous voltage before touching any
conductor or terminal.
• If the equipment’s shell is cracked during transportation or use, do not use it and
contact BLUETTI support or your local BLUETTI dealers.
• Use a dry powder fire extinguisher if the equipment catches fire.
• In case of fire, EVACUATE the building or affected area immediately, activate the
closest FIRE ALARM system and CALL your local emergency phone number.
• Use genuine cables and accessories provided by BLUETTI.
• Keep the unit away from heat sources or high temperatures, and do not expose it
to direct sunlight.
• Do not store the equipment with flammable liquids, gases, or explosive materials.
• Make sure the place where you are using the equipmentis well-ventilated and
spacious.
• Do not block or cover the openings of the equipment, as this may cause irrevers-
ible damage to it.
• Use the equipment for its intended purpose and avoid stacking objects on top of it
during storage or use.
• Do not move the unit during operation as the vibrations and shocks associated
with movement may cause damage to the internal hardware.
Danger
Follow these guidelines for proper operation.
To Next Page
Loading...
