Bluetti EP760 - Installation and Personnel Safety

Instruction
JUST POWER ON08
1.2. Installation Safety
Danger
Avoid working with live electrical components.
Before installation, double check the equipment for any signs of
damage or defects to minimize potential risks.
Make sure that the equipment and all associated switches are in the
"OFF" position to prevent electric shock.
Do not touch any terminal while the equipment is running, as it may
pose a risk of electric shock.
1.1.3 Personnel Requirements
•
The installation, commissioning, and maintenance should only be performed by
trained professionals who follow proper safety precautions and operating practices.
• To operate BLUETTI equipment, professionals must possess the necessary qualifica-
tions and certifications required by local regulatory authorities for tasks like
high-voltage operations, working at heights, and specialized equipment operations.
The transportation, wiring and maintenance shall comply with all
applicable laws, regulations and standards.
User-provided materials and tools required shall meet the require-
ments specified in applicable laws, regulations and relevant
standards.
• Turn off the equipment IMMEDIATELY in case of malfunction, and contact the
BLUETTI support team if this manual cannot explain the malfunction adequately
to you.
• Do not place the equipment on unstable or inclined surfaces.
Keep away from children and pets.
Comply with applicable laws and regulations.
•
•
•
•
•
•