JUST POWER ON74
Reserved
Reserved
Reserved
50.
51.
52.
53.
BMS Communication Interrupted
IOT Communication Interrupted
Zero Drift Anomaly-ARM
RTC Read and Write Anomaly
Turn off the inverter and wait 30 minutes to
restart it. If the symptom persists, please
contact the BLUETTI support team.
Check that the external communication
terminals are connected correctly and restart
the device. If the symptom persists, please
contact the BLUETTI support team.
Please make sure use the system within specific
temperature range. If the symptom persists,
please contact the BLUETTI support team.
Check the details on BLUETTI app.
54.
55.
56.
57.
58.
59.
60.
61.
62.
63.-64.
65.
66.
67.
68.-96.
97.
98.
99.
100.
101.
102.
Operating Ambient Temperature Anomaly
Temperature 1 Anomaly
Temperature 2 Anomaly
Temperature 3 Anomaly
Temperature 4 Anomaly
BMS Charge Protection
BMS Discharge Protection
BMS System Failure
Reserved
PV Overvoltage
BUS Soft Start Anomaly
If it occurs occasionally, the grid may go
through abnormal working conditions. The
inverter recovers after the grid resumes.
If it occurs many times, check if the grid voltage
and frequency support the inverter input
specifications. Check the inverter AC circuit
breaker and connections. If the voltage and
frequency are beyond the range, please contact
the BLUETTI support team.
Grid Voltage High
Grid Voltage Low
Grid Over Frequency
Grid Low Frequency
Grid Loss
To Next Page
Loading...
