Bluetti EP760 - Page 75

JUST POWER ON 75
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Check the PV setup for proper working
condition, and that voltage is within inverter PV
input voltage range.
103.
104.
105.
106.
107.
108.
109.
110.-128.
PV1 Voltage Low
PV2 Voltage Low
PV3 Voltage Low
DSP_Debug CAN Communication Failure
DSP_Debug RS485 Communication Failure
Grid Re-connection Anomaly
Please reconfigure the settings on
BLUETTI app. If the symptom persists,
please contact the BLUETTI support team.
129.
130.-133.
EEPROM Read and
Write Anomaly
The USB is formatted as FAT32 with no
more than 32G in size. Check if the
upgrade files exist or expire.
Turn on the inverter again. If the symptom
persists, please contact the BLUETTI
support team.
Check that the CT connection direction
and phase sequence are correct. If the
symptom persists, please contact the
BLUETTI support team.
Check whether the meter is powered and
whether the communication cable between
the meter and the EP760 energy storage
system is connected normally. If the problem
persists, please contact technical support.
Please download the latest upgrade files.
USB Upgrade Failure
USB Communication Anomaly
135.
136.
137.
USB Format Error134.
USB No Upgrade File
138.
141.
142.
143.
139.
140.
CT Connection Direction Error
Meter Communication Failure
Data Clearing in Progress