32 / 52
Drive with hydraulic motor
All motors must be charged with hydraulic uid before being operated and during installation.
Position the drain hole so that it is positioned uppermost for charging with uid.
Make sure the hoses are routed in such a way as to prevent the motor casing from emptying and
hence, prevent air pockets from forming which may affect pump suction during operation.
A - B = Supply lines
T = Drainage
Food grade.
Recommended use.
Permitted use. The manufacturer cannot guarantee the quality or suitability of lubricants. Characteristics
must be veri ed directly with the manufacturer of the chosen lubricant (or ask Bon glioli Technical
Service for oil certi cation).
PolyAlkylene Glycol (PAG) synthetic oil (API group V)
PolyAlphaOle n (PAO) synthetic oil (API group IV)
Mineral oil with EP additives
F
*
Omala S4 WE
Omala S4 GX
*
Omala S2 G
*
Blasia
*
Blasia SX
Blasia S
Klübersynth GH 6
F
Klübersynth UH1 6
*
Klübersynth GEM2
*
Klüberoil GEM1
Mobil Glygoyle
*
Mobil SHC 600
*
Mobilgear 600 XP
F
Mobil Glygoyle (USDA H1)
Alphasyn PG 320
Carter SY
F
Nevastane SY
To Next Page
Loading...
Need help?
General
