BONFIGLIOLI 300 Series User Manual

4 / 52
1.3 GLOSSARY AND TERMINOLOGY
Some of the frequently occurring terms used in this manual are described below to unequivocally
dene their meaning.
Routine maintenance
The set of operations required to preserve the functionality and efciency of the gear unit. These
operations are usually scheduled by the Manufacturer, who denes the qualications and tasks
involved.
Reactive maintenance
The set of operations required to preserve the functionality and efciency of the gear unit. These
operations are not scheduled by the Manufacturer and must be carried out by an expert mainte-
nance technician.
Expert maintenance technician
An authorised technician with the qualications, skills and mechanical and electrical training re-
quired to do repairs and non-routine maintenance work on the gear unit.
Overhaul
An overhaul consists in the replacement of bearings and other mechanical components which
have worn to such an extent as to compromise the operation of the gear unit. An overhaul also
includes verication of the condition of all gear unit components (keys, seals, gaskets, vents,
etc). If any such components are damaged they must be replaced and the reason for the damage
identied.
1.4 REQUESTING TECHNICAL ASSISTANCE
For any technical service needs, contact the Manufacturer’s sales network quoting the information
indicated on the unit’s nameplate, the approximate hours of service and the type of defect.
1.5 MANUFACTURER’S LIABILITY
The Manufacturer declines all liability in the event of:
• use of the gear unit in contravention of local safety at work legislation
• incorrect installation, disregard or incorrect application of the instructions provided in this manual
• incorrect or defective electrical/hydraulic power supply (gearmotors)
• modications or tampering
• work done on the unit by unqualied or unsuitable persons.
The safety of the gear unit also depends on scrupulous observance of the instructions given in
this manual, and in particular:
• always operate the unit within its operating limits
• diligently observe the routine maintenance schedule
• only allow trained operators to inspect and service the unit
• only use original spare parts
• the congurations given in the gear unit catalogue are the only ones permitted
• do not attempt to use the unit in any other way
• the instructions given in this manual do not substitute but rather supplement the provisions
of established safety legislation.

BONFIGLIOLI 300 Series Specifications

General

Brand	BONFIGLIOLI
Model	300 Series
Category	DC Drives
Language	English