3 / 52
1.2 PRODUCT IDENTIFICATION
The information identifying the product is shown on its nameplate. Gearmotors are equipped with
two nameplates; one on the gear unit which bears the gear unit data, and one on the motor (elec-
tric or hydraulic), bearing the motor data.
The drawing below illustrates the layout of the data.
The gear unit’s identifying code is explained in the Sales Catalogue. If the gear unit is supplied t-
ted with an electric motor (gearmotor), all information regarding the motor is supplied in the motor
manual.
Nameplate data
Supplementary nameplate on ATEX-specied gear units
Readability of the nameplate
The nameplate and the information on it must be readable and, consequently must be cleaned
from time to time.
Quote the nameplate data in all communications with the manufacturer, for example, when
requesting spare parts, information and assistance.
Manufacturer
Product identi cation
Product code
Reduction ratio
Serial number
Date of manufacture
Client product code
TUV IT 15 ATEX 001 AR
2014/34/UE
To Next Page
Loading...
Need help?
General
