Access Modular
Controller 2
Introduction | en 11
Bosch Security Systems B.V. 2019-11 | V02 |
7 Jumper: Interface selector RS-485 host connection,
RS-485 two wire or RS-485 four wire (depends on
external wiring)
8 Configurable RS-485 host interface
9 Docking port for compact flash memory
10 Configurable RS-232 host interface (ribbon cable
connector)
11 Configurable 10/100 Mbit/s Ethernet host interface
Figure3.3: Interfaces - overview
12 RS-485 extension module bus
13 External tamper contact
14 Connector for power supply
15 Wiegand interfaces for card readers
16 Connectors for analog inputs
17 Connectors for relay outputs
To Next Page
Loading...
