Bosch ADS?AMC2?2WCF - Installing; Mounting the device on a mounting rail

16 en | Installing
Access Modular
Controller 2
2019-11 | V02 | Bosch Security Systems B.V.
4 Installing
4.1 Mounting the device on a mounting rail
The controller can be attached on a standard 35mm (1.377in.)
mounting rail using a snap-in mechanism. Attach the controller
into the upper edge of the mounting rail, then push down the
device and snap it onto the rail by pushing it towards the back.
1 2
Figure4.1: Mounting the controller on a mounting rail