Bosch ADS?AMC2?2WCF - Unmounting the device from a mounting rail

Access Modular
Controller 2
Installing | en 17
Bosch Security Systems B.V. 2019-11 | V02 |
4.2 Unmounting the device from a mounting
rail
Notice!
To remove the controller from a mounting rail, first remove all
pluggable connectors.
Push down the controller until the lower edge snaps out of the
mounting rail [1]. Pull the lower end of the controller from the
mounting rail [2].
1 2
Figure4.2: Unmounting the controller from a mounting rail