14 en | Introduction
Access Modular
Controller 2
2019-11 | V02 | Bosch Security Systems B.V.
Push Display (Example) Description
controller’s signals. The second
eight digits display the extension
board’s signals.
3a Dig. I1: :::::::::::::::: If there are I/O-Boards connected
the signals will be shown on
separate pages.
3b Dig. I2: ::::::::::::::::
3c Dig. I3: ::::::::::::::::
4 MAC
0010174C8A0C
Network device address (MAC)
5 N AMC-1234-5678 Network name of the controller
6 I 192.168.10.18 IP-address of the controller
7 G 192.168.10.255 IP-address of the gateway
(Version V 00.44 or higher)
8 M 255.255.255.0 Subnetmask
(Version V 00.44 or higher)
9 H 192.168.10.10 IP-address of the host computer
10 DHCP 1 DHCP-status:
1 = on
0 = off
11 D 192.168.10.1 IP-address of the DNS server
12 Host: + "C" Host activity:
+ = online
- = offline
"C" = Counter of the received data
packages from the host interface.
RS 485 Bus connection:
A = Address 1 … H = Address 8
To Next Page
Loading...
