Bosch ADS?AMC2?2WCF - Page 33

Access Modular
Controller 2
Troubleshooting | en 33
Bosch Security Systems B.V. 2019-11 | V02 |
5. Set the DIL switches back in the address state before
resetting.
The controller now has the following network configuration:
– DHCP = 1
– IP = [assigned by DHCP server or “0.0.0.0” if not available]
– Subnet mask = [assigned by DHCP server or “0.0.0.0” if not
available]
– Password = no password
– Create your password in the IP Config settings of the
AMC.