Connecting Modules and Devices
The AMAX panel provides BOSCH option bus 1 and option bus 2 (only for AMAX 4000) to
connect modules and devices. Each module can be connected to each bus.
A maximum of 14 modules (8 keypads) can be connected to each bus.
The following overview displays the maximum number of modules that can be connected.
Module AMAX panel
2100
AMAX panel
3000
AMAX panel 4000
Keypads 4 8 16
DX2010 3 6
DX3010 1 2
B426 or DX4020 2 / 1 if DX4020G is used
B450 with B442 1
DX4020G 1
DX4010 1
RF receiver 1
Table 4.1: Maximum number of modules
How to connect a keypad and a RADION receiver:
1. Connect the keypad to the option bus on the AMAX panel according to the wiring diagram
(refer to Graphics, page 4).
2. Connect the RFRC-OPT RADION receiver to the option bus on the AMAX panel according
to the wiring diagram (refer to Graphics, page 4).
3. Connect the red and black wires supplied with the battery to the AMAX panel and the
battery.
4. Connect the power adapter and battery to the mains.
4
AMAX 2100 / 3000 / 4000 Connecting Modules and Devices | en 9
Bosch Sicherheitsysteme GmbH Quick Start Manual 2014.11 | 02 | F.01U.309.297
To Next Page
Loading...
