Bosch AMAX 4000 User Manual (English)

Other manuals for Bosch AMAX 4000

Operation Manual52 pages

Installation Guide160 pages

Quick Start Manual38 pages

Installation Manual164 pages

Quick Installation Guide30 pages

Questions and Answers:

B
bwilliamsAug 13, 2025
What to do if my Bosch Keypad is not responding to any key presses?
- D
  Douglas ChenAug 13, 2025
  If your Bosch Keypad is not responding and emits a wrong tone when pressing any key, it could be due to abnormal RBGY wiring, the keypad being locked after entering wrong passwords multiple times, or an incorrect jumper setting when using multiple keypads. To fix this, reconnect the RBGY wiring, wait 3 minutes before operating the keypad if it's locked, or reset the jumper referring to the information on keypad address settings.
K
Kathryn MeyerAug 16, 2025
How to troubleshoot a Bosch Keypad with no display after power up?
- N
  nreynoldsAug 16, 2025
  If there is no display on your Bosch Keypad after powering it up, it could be due to AC power or battery fuse failure, or abnormal RBGY wiring. Check if the AC power and battery fuses are properly connected and functioning normally. Also, try reconnecting the RBGY wiring.
L
Lisa SmithAug 25, 2025
What causes the zone indicator to stay constantly on on my Bosch Keypad?
- D
  Dr. Rebecca Guerra DDSAug 25, 2025
  If the zone indicator on your Bosch Keypad is constantly on, it could be due to wrong zone wiring, an abnormal detector function, or the zone EOL resistor not being correctly connected to the end of the detector. To resolve this, re-enter the zone wiring, reset the detector, and ensure the zone EOL resistor is correctly connected to the end of the detector.
S
Scott BennettAug 31, 2025
What to do if there is no display on the keypad after power up for Bosch AMAX 4000?
- D
  danieldanielAug 31, 2025
  If your Bosch Security System keypad isn't displaying anything after powering up, it could be due to a failure in the AC power or battery fuses, or abnormal RBGY wiring. Check that the AC power and battery fuses are properly connected and functioning correctly. Also, try reconnecting the RBGY wiring.
H
haysjessicaSep 4, 2025
What to do if my Bosch Security System keypad is not responding?
- C
  Clayton CooperSep 4, 2025
  If your Bosch Security System keypad is unresponsive and emits a wrong tone when you press any key, it could be due to: * Abnormal RBGY wiring. * The keypad being locked after entering incorrect passwords multiple times. * An incorrect jumper setting when using multiple keypads. To fix this, try reconnecting the RBGY wiring. If the keypad is locked, wait for 3 minutes before trying again. If you are using multiple keypads, reset the jumper referring to the keypad address settings information.
K
Kristin JacksonSep 8, 2025
How to fix a constant on zone indicator on a Bosch AMAX 4000 Security System?
- T
  Tricia PetersonSep 8, 2025
  If a zone indicator on your Bosch Security System is constantly on, it could be due to incorrect zone wiring, a malfunctioning detector, or the zone EOL resistor not being correctly connected to the end of the detector. Try re-entering the zone wiring, resetting the detector, and ensuring the zone EOL resistor is correctly connected to the end of the detector.