Bosch AMAX 4000 - Changing the menu language; How to change the menu language

The keyfob ID will be entered automatically.
15. Press [#].
16.
Optionally select the keyfob button 3 function.
17. Press [#].
P The system beeps twice. The new user code is added/changed.
4 Press [-] twice to exit.
Notice!
This function is automatically terminated if you do not press a button within 240 seconds or if
you press [#]. One long beep indicates that the code already exists or that you entered an
incorrect user number.
Change Individual Code
This function allows users to change the individual user code.
1. Enter your code + [5] [5] and press [#].
The system beeps twice and the STAY and AWAY indicators start flashing. The current
user code is displayed.
2.
Enter a new code with a default length of four digits. (A code with five or six digits is also
possible but has to be enabled by the installer.)
3. Press [#].
P The system beeps twice and the STAY and AWAY indicators stop flashing. The user code
is changed.
9.2
AMAX Codes | en 25
Bosch Sicherheitsysteme GmbH User Guide 2014.09 | 03 | F.01U.295.569