Bypassing
Bypassing/Unbypassing Zones
One or more zones can be disabled for one arming cycle. After bypassing a zone, you can arm
the system even when a zone is in alarm state.
How to Bypass/Unbypass a Zone via Text Keypad
1. Enter your code + [3] [1] and press [#].
The STAY indicator flashes fast. The available zones are shown. Already bypassed zones
are checked. Unavailable zones are marked with an x
.
2. Use [▲] and [▼] to display all zones.
3. Enter the two-digit zone number you wish to bypass/unbypass.
The selected zone is checked/unchecked.
4. Repeat step 3 if you want to bypass/unbypass multiple zones.
5. Press [#] to confirm.
6. Press [#] to exit.
How to Bypass/Unbypass a Zone via LED/LCD Keypad
1. Enter your code + [3] [1] and press [#].
The STAY indicator flashes fast. The lit number indicators show the bypassed zones. If no
numbers are lit, no zones are bypassed yet.
2. Enter the zone number you want to bypass/unbypass.
3. Press [*].
The system beeps twice. The corresponding number indicator is lit/extinguished.
4. Repeat step 2 if you want to bypass/unbypass multiple zones.
5. Press [#] to exit.
Bypassing Faults or Tamper Conditions
One or more faults or tamper conditions can be disabled for one arming cycle. After bypassing
a fault or tamper condition, you can arm the system even when a fault or tamper condition
exists.
Only zone tampers can not be bypassed.
How to bypass a Fault or Tamper Condition
4 Enter your code + [3] [4] and press [#].
P The system beeps twice and fault or tamper conditions are bypassed.
6
6.1
6.1.1
6.1.2
6.2
20 en | Bypassing AMAX
2014.09 | 03 | F.01U.295.569 User Guide Bosch Sicherheitsysteme GmbH
To Next Page
Loading...
