Arming with a Master Keypad
An optional master text keypad can be added if there is more than one assigned area on your
system.
Please contact your installer to enable/disable this function.
The master keypad can be used to arm single or all assigned areas.
How to Arm All Areas in AWAY Mode:
4 Enter your code + [0] [0] and press [#].
P The system beeps twice, the AWAY indicator flashes slowly and exit time starts. After the
exit time, the AWAY indicator is lit and all areas are displayed as armed.
How to Arm All Areas in STAY Mode:
4 Enter your code + [0] [0] and press [*].
P The system beeps twice, the STAY indicator flashes slowly and exit time starts. After the
exit time, the STAY indicator is lit and all areas are displayed as armed.
How to Arm a Single Area in AWAY Mode (Direct Arm):
1.
Enter your code and the two-digit number of the area you want to arm.
2.
Press [#].
P The AWAY indicator flashes slowly and exit time starts. After the exit time, the AWAY
indicator is lit and the selected area is displayed as armed.
4 Repeat step 1 if you want to arm multiple areas.
How to Arm a Single Area in STAY Mode (Direct Arm):
1. Enter your code and the two-digit number of the area you want to arm.
2. Press [*].
P The STAY indicator flashes slowly and exit time starts. After the exit time, the STAY
indicator is lit and the selected area is displayed as armed.
4 Repeat step 1 if you want to arm multiple areas.
3.1.4
16 en | Arming and Disarming the System AMAX
2014.09 | 03 | F.01U.295.569 User Guide Bosch Sicherheitsysteme GmbH
To Next Page
Loading...
