Exiting a Menu
4 Press [–] to get back to the previous menu.
Confirming the Input
4 Press [#] to confirm the input.
Switching between Settings
4 Press and hold [*] for 3 seconds to switch between settings.
Operating a Menu
1. Operate according to the menu prompt.
Select the menu and enter data for specific programming items according to the display
on the keypad to complete the programming, step by step.
2. Press [#] to confirm each step.
Exiting the Programming Menu
1. Complete all programming input by repeating the programming steps above and press [–]
to get back to the current main menu level by level.
2. Press [–] to get to the EXIT PROG. +SAVE menu.
It is optional to save or not to save the programming data.
1. Select EXIT PROG. +SAVE and press [#] to save the data and to exit the programming
mode.
2. Select EXIT PROG. UNSAVED and press [#] to exit programming mode without saving
the data.
Programming the AMAX panel with a text keypad
Installer menu
The following graphics show an overview of the installer menu structure displayed on a text
keypad.
5.4
5.4.1
12 en | Programming and operating the AMAX panel AMAX panel
2016.05 | 06 | F.01U.309.297 Quick Installation Guide Bosch Sicherheitssysteme GmbH
To Next Page
Loading...
