2 Report to Destination 2
3 Report to Destination 3
4 Report to Destination 4
5 Report to Destination 1 ,2, 3, 4
6 Report to Destination 1 (2, 3, 4 backup)
7 Report to Destination 1 (2 Backup) and 3 (4 backup)
Common Area Settings
Option
Address Default Value Range
Common Area Type 0370 0 0 = none
1 = Follow Partition 2
2 = Follow Partition 2-3
3 = Follow Partition 2-4
4 = Follow Partition 2-5
5 = Follow Partition 2-6
6 = Follow Partition 2-7
7 = Follow Partition 2-8
8 = Follow Partition 2-9
9 = Follow Partition 2-10
10 = Follow Partition 2-11
11 = Follow Partition 2-12
12 = Follow Partition 2-13
13 = Follow Partition 2-14
14 = Follow Partition 2-15
15 = Follow Partition 2-16
Notice!
In case of common Area, the Area 1 will be the common Area. When there is only 1 Area in the
system, the address 0370 can only be programmed as 1.
120 en | Programming
AMAX panel 4000 / AMAX panel 4000
EN
2013.07 | 03 | F.01U.267.112 Installation Guide Bosch Sicherheitsysteme GmbH
To Next Page
Loading...
