Bosch AUTODOME 7000 VG5-7230 - 19 User Command Table

User Command Table
Notice!
Some of the following commands may not apply to your camera.
Locked Alarm Rule
Output
Function
Key
Comm
No.
Command Description
Y On/Off 1 Scan 360° Auto Pan without limits
Y On/Off 2 Auto Pan Auto Pan between limits
Y On/Off 8 Play Pre-position Tour Activate/Deactivate
Y Y On/Off 18 AutoPivot Enable Enables/disables AutoPivot
Y On/Off 20 Backlight Comp Backlight Compensation
Y On/Off 24 Stabilization Electronic Stabilization
(Available only with the AUTODOME
7000 IP)
Y On/Off 40 Restore Camera
Settings
Restores all setting to their original
defaults
Y Y On/Off 43 Auto Gain Control AGC–On, Auto, Off
50 Playback Tour A Activate/Deactivate
52 Playback Tour B Activate/Deactivate
Y On/Off 57 Night Mode setting Enables/Disables Night Mode (Day/
Night only)
Y Y On/Off 60 On Screen Display On–enable
Off–disable
Y Y On/Off 66 Display Software
Version
Display software version information.
Issue Once–presents basic
information
Issue Twice (while basic info
displayed) –presents expanded
information (HD models only)
On/Off 78 Intelligent Tracking Turns Intelligent Tracking on or off
Y Y On/Off 80 Digital Zoom Lock Turns digital zoom on and off
Y Y On/Off 86 Sector Blanking On–enable
Off–disable
Y Y On/Off 87 Privacy Masking On–enable
Off–disable
Y On/Off 90 Command Lock/Unlock On–lock on
Off–lock off
19
AUTODOME 7000 User Command Table | en 149
Bosch Security Systems, Inc. Operation Manual 2014.04 | 2.0 | F.01U.283.679