Notice!
Pins for P105 1, 2, 4, and 5 are used for audio input and output for AUTODOME 7000 Series
cameras; however, their labels are still those of previous versions of analog AUTODOME
cameras.
Warning!
24 VAC Class 2 power supply only.
Installing the Ceiling (IP54 Housing) Gasket
In order to conform to the IP54 rating, you must install the ceiling gasket, illustrated (along
with the other pieces that protect the camera and provide the IP54 rating) in the figure below.
In addition, if you are using the optional black trim ring instead of the factory-installed white
trim ring, the trim ring gasket must also be in place to provide the IP54 protection. (Refer to
Replace the trim ring (optional) (In-ceiling models), page 69 for step-by-step installation
instructions.)
9.7
64 en | Installing the In-Ceiling Mount AUTODOME 7000
2014.04 | 2.0 | F.01U.283.679 Operation Manual Bosch Security Systems, Inc.
To Next Page
Loading...
