Bosch AUTODOME 7000 VG5-7230 - Page 54

3 6-pin Connector
Alarms In (3-7)
P103
4 4-pin Connector
Alarms Out (1-3)
P102
5 100 Ω Resistor
Note: When using
the audio input in
an AUTODOME
7000 Series
camera, remove
this resistor.
P105
6 Data In/Out P105 AWG
26-16
1 Biphase (C-)
For AUTODOME 7000 Series: AUDIO IN –
(Audio in signal ground)
2 Biphase (C+)
For AUTODOME 7000 Series: AUDIO IN +
3 Earth Ground
4 RxD +
For AUTODOME 7000 Series: AUDIO
OUT +
5 TxD –
For AUTODOME 7000 Series: AUDIO
OUT – (Audio out signal ground)
6 Signal Ground
7 Alarms In (EOLR
Supervised, 1-2)
P104 AWG
26-16
7 Ground
6 Alarm 2
5 Alarm 1
4 Earth Ground
8 Relay Output P104 AWG
26-16
3 Normally Closed
2 Common
1 Normally Open
9 Dome Power P101 AWG
18-14
3 Dome 24 VAC
2 Earth Ground
1 Dome 24 VAC
10 Heater Power P107 AWG
18-14
2 Heater 24 VAC
1 Heater 24 VAC
11 RJ45 Ethernet J101
12 To camera
54 en | Installing the Roof Parapet and Pipe Mounts AUTODOME 7000
2014.04 | 2.0 | F.01U.283.679 Operation Manual Bosch Security Systems, Inc.