4. Click the Settings link, located at the top of the LIVE page.
5. In the left pane of the window, click Advanced Mode, and then click Network. The
Network menu expands.
6. Click Network Access to open the Network Access page.
Figure 13.1: Network Access page
7. Configure the settings on this page based on the addresses provided by your local
network administrator. Note that the text on the Set button changes to Set and Reboot.
82
en | Configuration AUTODOME 7000
2014.04 | 2.0 | F.01U.283.679 Operation Manual Bosch Security Systems, Inc.
To Next Page
Loading...
