Bosch AUTODOME 7000 VG5-7230 - Page 99

Note (for dynamic models only): In order to select the option “H.264 MP 1080p25/30 Fixed”
here, you must set the Max.frame rate field in the Advanced Mode: Camera >Installer Menu to
“H.264 MP 1080p25/30 Fixed” first.
Stream 2 Options vary depending on Stream 1 selection.
Options with “H.264 MP 1080p25/30 Fixed” selected for
Stream 1:
– Copy Stream 1
– H.264 MP SD
– H.264 MP 720p8/10 Fixed
– H.264 MP 1080p4/5 Fixed
– H.264 MP upright (cropped)
– H.264 MP D1 4:3 (cropped)
Options with “H.264 MP 720p50/60 Fixed” selected for
Stream 1:
– Copy Stream 1
– H.264 MP SD
– H.264 MP 720p6/7 Fixed
– H.264 MP upright (cropped)
– H.264 MP D1 4:3 (cropped)
Options with “H.264 MP 720p25/30 Fixed” selected for
Stream 1:
– H.264 MP SD
– H.264 MP 720p25/30 Fixed
– H.264 MP upright (cropped)
– H.264 MP D1 4:3 (cropped)
– H.264 MP 1280x960 (cropped)
Option with “H.264 MP SD” selected for Stream 1: H.264 MP
SD
Non-recording profile
Select one of the following profiles for each stream:
Preview
Click the Preview button to open a small static preview window for each stream. To enlarge
the preview and view live video, click the 1:1 Live View button.
JPEG stream
Select the resolution, frame rate, and image quality parameters for the M-JPEG stream.
– Resolution: Select the appropriate resolution.
– Max. frame rate: Select one of the following frame rates to be the maximum: 5, 10, 15,
20, 25, or 30 ips.
– Picture quality: This setting allows you to adjust the image quality. Use the slide bar to
choose a quality between Low and High.
Note: The M-JPEG frame rate can vary depending on system loading.
See also
– Encoder Profile, page 96
AUTODOME 7000
Configuration via IP, Advanced Mode | en 99
Bosch Security Systems, Inc. Operation Manual 2014.04 | 2.0 | F.01U.283.679