[6] Cloud menu
Use the Cloud menu to view and edit Cloud settings and view the Cloud connection status.
[1] Setup
Use this menu to enable the Cloud connection, and to view and edit the control panel Cloud
settings for:
Value
License (assigned by Bosch) _____________________________________________
Remote ID (assigned by Bosch) _____________________________________________
Product ID (for Remote Security
Certificate Builder)
_____________________________________________
Set Enable Status
B91x/B92x keypads use of Set Enable Status
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [1] Program > [6] Cloud > [1] Setup > [1] Enable Status. The keypad shows the
current status.
3. Press [ENTER] to change the status, or press [ESC] without making a change. To use the
Cloud, enable it.
4. Upon setting to Enabled, the keypad advances to the Set License menu. Upon setting to
Disabled the keypad shows Parameter Saved, and then closes the menu.
B93x/B94x keypads use of Enable Status
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [1] Program > [6] Cloud > [1] Setup > [1] Set Enable Status. The keypad shows the
current status.
3. Press [ENTER] to change the status, or press [ESC] without making a change. To use the
Cloud, enable it.
4. Upon setting to Enabled, the keypad advances to the Set License menu. Upon setting to
Disabled the keypad shows Parameter Saved, and then closes the menu.
Set License
B91x/B92x keypads use of Set License
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [1] Program > [6] Cloud > [1] Setup > [2] Set License.
3. Delete the existing license, if necessary, and then enter the license number without the
dashes (for example, 7356169825515560).
4. Press [ENTER] to save the programming.
5. The keypad advances to the Set Remote ID menu.
B93x/B94x keypads use of Set License
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [1] Program > [6] Cloud > [1] Setup > [2] Set License.
3. Delete the existing license, if necessary, and then enter the license number without the
dashes (for example, 7356169825515560).
4. Press [Save] to save the programming.
5. The keypad advances to the Set Remote ID menu.
19.6
19.6.1
Control Panel Keypad Installer menu | en 143
Bosch Security Systems, Inc. Installation and System Reference Guide 2015.07 | 12 | F.01U.287.180
To Next Page
Loading...
