Notice!
Compliance with ULC-S304
For compliance with ULC-S304 the Conettix central station receiver/gateway and D6200
Programming/Administration Software must be updated as shown in the table below for both
the Modem4 reporting format and the Contact ID reporting format.
ULC-S304 Modem4 and ContactID reporting format requirements
Receiver/Gateway CPU version D6200 version
Conettix D6600 Communications Receiver/Gateway
(with D6641 line cards installed only)
01.11.00 2.20
Conettix D6100IPv6 Communications Receiver/Gateway 61.11.00 2.20
Conettix D6100i Communications Receiver/Gateway 61.11.00 2.20
Control Panel IP communications | en 51
Bosch Security Systems, Inc. Installation and System Reference Guide 2015.07 | 12 | F.01U.287.180
To Next Page
Loading...
