11 | Starting up
54/112 Data Logger C 70 Manual Bosch Motorsport
RaceCon detects configuration differences between the C 70 and the RaceCon project
and asks for permission for data download.
8. Click ‘Yes’ to download the configurations to the device or ‘No’ to continue without
downloading the data.
Successful ethernet
connection, DDU
"talks" to PC
If the device turns red, you might need to do a firmware update on the device. For
more information see chapter “Firmware update [}102]”.
The download starts and the C 70 carries out a reset.
After the reset, RaceCon reconnects to the C 70. Local configuration on both the PC
and C 70 match (indicated by green background and dot). The C 70 is now connected
to RaceCon.
To Next Page
Loading...
