Product Information
Climate Class 6100i/8100i – 6721831492 (2021/02)
14
2Product Information
2.1 Declaration of conformity
The design and operating characteristics of this product comply with the
European and national requirements.
The CE marking declares that the product complies with all the
applicable EU legislation, which is stipulated by attaching this
marking.
The complete text of the Declaration of Conformity is available on the
Internet: worcester-bosch.co.uk.
2.2 Simplified EU Declaration of Conformity regarding
radio equipment
Bosch Thermotechnik GmbH hereby declares, that the Climate Class
6100i/8100i product described in these instructions complies with the
Directive 2014/53/EU.
The complete text of the EU Declaration of Conformity is available on the
Internet: worcester-bosch.co.uk.
2.3 Specifications of remote control
Table 2
2.4 IP Gateway specifications
Table 3
3Operation
3.1 Indoor unit overview
Key to Fig. 1:
[1] Indoor inlet (air)
[2] Air filter
[3] Top panel
[4] Horizontal airflow louver
[5] ON/OFF button and receiver window
[6] Movement sensor
[7] Vertical airflow louver
[8] Indoor outlet (air)
[9] ON indicator K (green)
[10] Timer lamp (orange)
[11] WLAN lamp (green)
[12] Plasmacluster lamp (blue)
3.2 Remote control overview
Table 4 Keys on remote control
If the remote control is no longer responding due to a fault, press the
Reset button with a needle or thin rod.
Power infeed 2 AAA batteries
Signal range 7 m
Permissible ambient temperature –5 °C ... 50 °C
Unit Value
UV
DC
5
P
max
W 2.5
f (RF) GHz 2.4 (802.11 b/g/n)
(P = max. + 20 dBm)
T
amb
°C –20 ... 50
BUS – UART
IP class – IP40
Pos. Key Function
1 Heat Heating mode
Temp. Adjusting the set temperature
Cool Cooling mode
2 Plasmacluster mode
Auto Automatic mode
Fan Fan speed setting
Full
power
Full power mode
Stop Switching the appliance off
10 °C Heating mode with 10 °C
3 Vertical airflow setting
Horizontal airflow setting
Clean Self cleaning mode
Multi-Space mode
Spot Selective airflow mode
Silent outdoor unit mode
4 Timer for turning on at set time
Timer for turning off at set time
./ Setting time of timer
Set/C Activate or cancel timer
Timer for turning off after 1 to 5 hours
5 Reset Restore the factory setting of the remote control
WLAN To establish connection with the Bosch HomeCom
Easy app
Display Change brightness of the lamps
Clock Set current time
1
2
3
4
5
0010035790-001
OBJ_DCL-6721831492-001.fm Page 14 Friday, April 23, 2021 9:45 AM
To Next Page
Loading...
