Assembly
Unpacking and Checking Contents
Unpacking the Miter Saw – When removing this
tool from packaging materials, reach down to the
t
wo side carry-handle locations and slowly lift until
it clears thepackage.
T
o avoid severe pinching,
never lift or move this saw
by gripping any component of the mechanism
support system.
Checking Contents in Package – Open the top of
the package and look for the included loose parts.
Refer to the diagram below.
To avoid possible injury,
always disconnect plug from
p
ower source before performing any assembly,
adjustments or repairs.
To Next Page
Loading...
Need help?
General
