6 720 809 134 (2013/09)Compress 3000 DW FII
Operation | 23
Fig. 33 Setting operating times
[1] Start of the first operating time
[2] End of the first operating time
[3] Start of the second operating time
[4] End of the second operating time
Deleting the operating time
▶ Set the start and end of the operating time to the same time.
The operating time is deleted.
If you do not wish to set a second operating time:
▶ Set the start and end of the second operating time to the
same time.
The display will show "--:--".
Fig. 34
" " symbol is displayed
During appliance operating time.
" " symbol is displayed
Outside of appliance operating time.
8.6.3 "Leg" - Automatic thermal disinfection
The "Leg" function allows you to activate/deactivate thermal
disinfection. This process is used to kill bacteria and must be
performed by the user at least once a week.
Fig. 35 "Leg" function
Activating the automatic "Leg" function
▶ Call up the "Leg" function and press "OK".
" " flashes on the display.
▶Press "+".
" " flashes on the display.
▶Press "OK".
The "Leg" function is activated and the first day of the week
flashes.
Set the day of the week for disinfection.
▶ Select the day using the "+" and "-" buttons.
▶Press "OK".
This function is deactivated on the appliance
at the factory.
When the disinfection is activated, all other
settings are temporarily suspended.
WARNING: Risk of scalding!
Hot water can lead to severe scalding.
▶ Only schedule thermal disinfection for
periods outside normal usage times.
▶ Inform occupants of the building of the
danger of scalding and always monitor
the thermal disinfection process. Install a
thermostatic DHW mixer.
The disinfection takes max. 48 h. During the
first 24 hours, the appliance is in the "Combi"
operating mode. If it does not reach 70 °C,
the appliance switches to the "Full" operating
mode for the next 24 hours.
The DHW temperature is automatically set to
70 °C.
To Next Page
Loading...
