Bosch Compress 3000 DW FI Series User Manual

6 720 809 134 (2013/09)Compress 3000 DW FII
Standard delivery | 5
2 Standard delivery
Fig. 1
[1] Heat pump
[2] Set of printed documents for the appliance
[3] Condensate drain pipe
3 About the appliance
Appliances in the HP270... series are heat pumps which use
the energy in the ambient air for DHW heating.
3.1 Intended use
The appliance may only be used for DHW heating.
Using the boiler for any other purpose will be considered
incorrect use. Buderus accepts no liability for any damage
resulting from such use.
The appliance is not suitable for commercial or industrial
applications. It is approved for household use only.
3.2 Type overview
[HP] Heat pump
[270] Cylinder capacity (in litres)
[-2] Version
[E] Electronic control
[1] Number of internal indirect coils in the cylinder
[F] Floor installation
[I] Indoor installation
[I] Air supply from inside
[V] Vertical installation
[S] Side connections
3.3 Data plate
The data plate is located on the rear side of the appliance.
There you will find details on the appliance performance, part
numbers, approval data, the coded date of manufacture (FD),
serial numbers and other specifications.
3.4 Description of appliance
Appliance for DHW heating with the following properties:
• Glass-lined steel cylinder with thermal insulation using CFC-
free rigid polyurethane foam.
• Cylinder is corrosion-protected using internal magnesium
anode.
• The refrigerant and DHW circuits are completely separate.
• "Heat pump" operating mode stops automatically
1)
at air
inlet temperatures below -10 °C or over 35 °C.
• Upper limit pressure switch protects the refrigerant circuit.
• R134a used as the refrigerant.
• DHW temperatures between 30 °C and 70 °C (the default
setting for the DHW temperature is 50 °C).
1
6720804054-13.1V
2
3
HP 270 -2 E 1FIIVs
HP 270 -2 E 0FIIVs
Table 2
1)  chapter 8.5.2

Bosch Compress 3000 DW FI Series Specifications

General

Brand	Bosch
Model	Compress 3000 DW FI Series
Category	Heat Pump
Language	English